This piece forms a 40cm oval, long on its base. It has edge marks on the base to improve alignment and rear holes to improve gluing. It should be installed in a rational and orderly manner and integrated into the project although its cushioned and organic form allow for other types of placements.

A cylinder section, 30cm in diameter, with the cut section lightly concaved. It has a thickness of 4cm. and lateral edge marks on the base to correctly align the piece, as well as rear holes for improving the gluing. It should be installed rationally (in an ordered fashion) and integrated into the project or even as a practical architectural solution for exteriors with different colour compositions..

This is a rhombus which first grows perpendicular to the wall to later smooth out its volume. This movement serves to improve the repair of the join area with the wall in case of it being integrated for painting. It would need an ordered installation integrated into the project although it admits a certain amount of imagination.

This is a square which encloses another smaller square, 30cm long by 3cm thickness (check), with edge grooves on the base to improve alignment as well as rear holes to aid gluing. It will normally be installed in an orderly fashion and integrated into the project (painted with the wall) or in a different tone but without shrillness.

The base is nearly square although rounded at the corners in a natural manner. There is a concaved circular profile in the centre. It will normally be installed in a regular and organised fashion but it of course allows for other layouts..

Circular (although not spherical) volumetric sections of 40 and 30cm diameter. There are edge marks to improve alignment and rear holes to improve gluing. This is ideal for being placed in an unordered fashion and even for mixing both models, although it would also be very interesting placed in an orderly way and integrated into the wall.

The left and right hands (two different models) are flat based with a movement originating in the wrist area which subtly suggests that it comes from wall where it is installed. It can be used for all types of installation: ordered and unordered and with the same or a different colour to the wall.

Rounded base piece with a 40 cm diameter that rises subtly in
the centre, like a cone whith a revolutionary curved edge.
Recommended for integration on walls.

A narrow piece with a large curved section that can be laid out
both horizontally and vertically, as well as by joining the pieces or
arranging them in an isolated, separated fashion.
To archieve different effect in each of these applications.

Pieces to measurement Inside this scale that we name TEW CONCEPT and with the same extract we can make any piece as they design the prescriptores.